Key Product Highlights
- Hydro-Propulsion Technology: The heavy-duty jetter nozzle features rear-facing water jets that create massive forward thrust, pulling the highly flexible hose deep into the drain pipe without needing manual pushing.
- Forward-Facing Penetrator Jet: Equipped with an aggressive, front-firing water stream designed to fracture and emulsify tough blockages, ice blocks, or thick grease walls directly in its path.
- Vibra-Pulse® / Pulsation Control: Features built-in pulsation technology that creates a slight, intentional vibration in the line. This helps the hose “wiggle” effortlessly around sharp 90-degree pipe bends and P-traps.
- Safe and Chemical-Free: Uses nothing but highly pressurized water to clear pipelines, making it completely safe for old clay tile, PVC, cast iron, and septic tank configurations.
Technical Specifications
| Feature | Typical Specification Range |
| Operating Pressure | 1,500 to 3,000+ PSI (Pounds Per Square Inch) |
| Water Flow Rate | 1.7 to 4.0+ GPM (Gallons Per Minute) |
| Hose Reel Length | 50 ft of high-performance slick-cover jetter line |
| Target Pipe Diameters | Safely clears lines from 1.5” up to 4” |
| Nozzle Configurations | Standard Button-Nose, High-Thrust Laser, and Rotating Scrubbing Tips |
Primary Drainage & Rental Applications
- Commercial Kitchen Maintenance: Emulsifying heavy grease, soap scum, and fat build-ups in restaurant or bakery floor drains.
- Main Sewer Lateral Line Cleaning: Restoring flow from a residential home cleanout line straight to the city main line.
- Outdoor Footing & Storm Drains: Flushing out tightly packed mud, yard sand, and leaf sludge from landscape drains.
- Culvert & Gutter Downspout Clearing: Rapidly removing debris blockages from underground drainage systems
Important Rental Policies & Fine Print
- Water Source Required: A continuous, reliable water supply (such as a standard outdoor garden spigot) is required at the job site. Never run the high-pressure pump dry, or permanent seal damage will occur.
- Nozzle Handling Safety: High-pressure water can cause severe skin injuries. The jetter hose must always be fully inserted at least 2–3 feet into the pipe before turning the pump on, and the pump must be turned off before retrieving the nozzle.
- Protective Gear: Operators must wear heavy waterproof work gloves and safety glasses/face shields at all times during operation to protect against drain back-splash.
- Clean-Return Policy: Hose and machine must be thoroughly wiped down and rinsed of sewage debris prior to return. A cleaning deposit or fee applies if returned dirty.
